36V or 48V Series to IQ Conversion kit.

 

This kit is needed to convert any 1996 - 2006 NON-IQ Club Car DS to the IQ drive system.  Your vehicle MUST have the IQ drive system in order to use the Alltrax XCT, Navitas TSX, or Navitas AC Drive System.

 

Included In the Kit:

1 - Wire Harness, OEM, Club Car DS IQ

1 - Tow/Run Switch

1 - Tow/Run Switch Bracket and Decal

1 - F&R Switch Housing with mounting hardware

1 - F&R Switch

1 - MCOR4 Conversion Kit

1 - Accelerator Pivot Rod

2 - Accelerator Bearing & Bracket Assembly

1 - Controller Mounting Panel with mounting hardware

 

Our conversion kit is different than anybody else's.  We use factory parts. Our wire colors will match what you see in a factory diagram for a DS with the IQ system. Our kit adds a tow/run switch. Aftermarket kits do not. Without a tow/run switch, your key switch disables your entire system which in-turn disables the safety rollaway braking when parked with the key off.  With an aftermarket setup, if the vehicle is parked on a hill and the park brake comes loose and the vehicle rolls away it will not attempt to slow itself down. With our kit this is not an issue because the tow/run switch controls this circuit whether the key switch is on or off. Our kit includes a factory MCOR4 throttle control unit and all linkage parts to install it on your chassis. The MCOR4 is the newest throttle device from Club Car and will fit on any chassis from 1996 and newer.  For a pre-1996, you can exclude the MCOR4 and install a Curtis PB8 (Sold Separately), but you'll have to make your own mounting bracket and connect it to the existing accelerator linkage. You can exclude the MCOR4 (and linkage parts) via the drop-down menu on this page. For charging, other kits REQUIRE you to purchase a brand new charger. This is optional with our kit. If you have a 1998-2006 48 volt series car we can integrate your factory on-board computer into this wire harness and you can keep it on the car. This will allow you to continue to use your factory charger.  For this option, you need to select "Modify for 3-Pin" from the drop-down menu. If you have a 1996-1997 series 48 volt car, you can use your factory OBC, but it will not mount into the mounting panel. You'll have to figure out a way to mount it if you want to re-use it. For these vehicles and all 36 volt vehicles we recommend choosing the option "Bypass OBC Entirely" and purchasing a Lester Summit II or MODZ MAX smart charger. Neither one of these chargers require an OBC (Onboard Computer) for charger control. If you have one of these cars and you will not be re-using the original OBC or if you didn't have an OBC to begin with but you want to use a factory PowerDrive charger instead of a smart charger, you'll need to select "Leave Intact for IQ OBC" and purchase an OBC, part number 103697301. We have these in our store. Please note that the charge interlock feature will not work if the OBC is bypassed or if you're using a series-OBC on the IQ wire harness.  The charge interlock is the function of the OBC that keeps the vehicle from being operable while charger. Please make sure everyone who uses your vehicle is aware that this feature will no longer work. The only way to salvage this feature is to install a new onboard computer for the IQ system as mentioned above.

 

The mounting panel that's included with the kit may or may not be necessary. If you have a 36 volt cart, you'll need the panel.  If you have a 1997 or older 48 volt cart, you'll need the panel.  The only time you will not need the panel is if you have a 1998 or newer 48 volt cart. The panel will already be installed on these cars and you may exclude it from this kit.

 

 

36V Resistor or 48V Series TO IQ Conversion Kit (For Navitas or Alltrax))

$483.15 Regular Price
$444.50Sale Price

    Please note that due the COVID-19 Pandemic, Most of our products will show "IN STOCK" status, even when they are not currently available. If you are concerned with having to wait on a back-order, please contact us PRIOR to ordering. With the exception of lift kits, if an item is marked "OUT OF STOCK" it is because of a long term back-order that we do not currently have an ETA for. If you place an order and choose to cancel at anytime, no problem. Be aware that cancelled orders in back-order status will be fully refunded minus the non-refundable 3.5% PayPal processing fee. We highly recommend you ask about availability status PRIOR to ordering by texting or emailing us. Please provide the SKU number of the item in your message. This is explained in further detail on our main page, or by clicking HERE.

    Please note that most of our items are in stock. Lift Kits and Tire/Wheel packages are most affected by the back-order situation.

    CONTACT US:

    Text: 706-431-3917

    Email: info@revolutiongolfcars.com