101789101 - GUIDE RING
101789101 - Motor Guide Ring
- 101789101 - MOTOR GUIDE RING FITS LATE 80s TO LATE 90s CLUB CAR VEHICLES WITH NYLON GUIDE RINGS IN THE OUTPUT SHAFT OF THE MOTOR. FOR SOLID SHAFT MOTORS, USE AM10039 MOTOR CENTERING KIT INSTEAD
Installation Instructions: Remove C-Clip from motor output shaft. Break out the old guide ring. Remove all pieces of the old guide ring and clean the inside of the output shaft really good with Acetone. Apply a generous amount of LocTite 426 adhesive to the guide ring. Install new guide ring into the output shaft of the motor with the "MOTOR SIDE" of the guide ring facing down towards the motor, making sure that the splines are lined up correctly with the splines in the bottom of the shaft. Re-install C-Clip. Wait 24 hours for glue to cure before you use the motor.