Genuine Albright brand SW180 solenoid. This solenoid is perfect for use with any of our performance controllers up to 400 amps.
- This is a premium quality solenoid designed for many years of life.
- Contactor studs are 5/16" in diameter. Coil terminals are 1/4" blade terminals.
- Coil suppression diode and resistor may or may not be required with this solenoid. Please watch our Youtube video about solenoids, diodes, and resistors to educate yourself on this. If you have questions please reach out. It is absolutely crucial for you to know which coil wire is positive and which coil wire is negative. Failure to connect these wires correctly will result in damage to the controller and/or the micro-switch that controls the solenoid. Again, we will be happy to help you with this if necessary.
- If this solenoid is ordered with a wire harness from our online store, we will modify the wire harness to have matching connectors to allow you to easily connect your harness to this solenoid without having to do any cutting or splicing.
- Available in 36, and 48 volt coil (activation) voltage.





