Controller Mounting Panel for Club Car DS
Through the years there were several different widths of the DS electric chassis. This panel will fit all of them. Trimming may be required if the width is too wide for your application. We recommend trimming equally on both sides of the panel in order to avoid fitment and centering issues.
Controller Mounting Panel for Club Car DS
Position the panel as shown in the photographs.
If necessary, trim the panel to the desired length. Trim equally on both sides of the panel.
-If your vehicle doesn't have pre-existing mounting holes, drill two 17/64" holes into your vehicle chassis and mount the panel using 5/16-18" bolts. (Can be included with purchase)
-For the side mounting bolts, position the panel where the round channel is positioned against the sides of the vertical supports of the vehicle chassis and drill a 3/8" hole through the vehicle chassis to allow for a 5/16" self drilling bolt (Can be included with purchase) to thread directly into the round channel on the front of the panel.
-Tighten all hardware