Wiring Conversion Kit, for Onward HP to Non HP
It's no secret that the Onward is an incredible machine. The Onward HP take it up another notch, except for that one little issue that everybody seems to have with them. Speed, or lack thereof. A Club Car Onward HP will only run 19.6 MPH from the factory. It doesn't matter if you're on a downhill slope, level ground, or climbing a mild grade, the HP will NOT exceed 19.6 MPH under any circumstances. We know what you're thinking. Yes, that's a ton of money to spend on a car that won't run over 20 mph. Just a little more speed won't hurt, right? Yes, You're right!
This conversion kit that we have compiled consists of four OEM wire harnesses that can be found on a NON-HP Club Car Onward. These machines came stock with the ERIC system, which is the same as a Precedent or a Tempo. Once you remove the factory wiring from your Onward HP and install these harnesses in place of them, you're going to be able to upgrade the vehicle how you see fit. All of our upgrade packages for the Precedent/Tempo are now going to be an option for you. Your lights will integrate perfectly into the new wiring because, why wouldn't they? These are factory parts that were made for the same chassis. Everything FITS like factory, because it IS factory.
Included in the kit are:
- 104023201 - Main Harness (for MCOR4)
OR - 47719402001 - Main Harness (for APPS throttle)
(We need your vehicle serial number. Failure to enter an accurate serial number on the order form may result in you receiving the incorrect main harness. There's a box on the right side of this page to enter your vehicle serial number. This is very important.)
- 103991501 - IP Harness - Drive System
- 47574837001 - Harness, Lighting, MAIN
- 47562746001 - IP Harness - Lighting
Please see our Youtube video that is clipped to the top of this sales page, or watch it on youtube by clicking here: www.youtube.com
NOTE: This kit has a 9-pin connector for the turn signal switch. Some Onward HP vehicles will have a 6-pin turn signal switch instead of a 9-pin turn signal switch. These vehicles with the 6-pin harness will have a separate hazard light switch on the dash instead of on the turn signal stalk. If you have one of these cars, you will need to order turn signal switch LGT-112A from our online store for a Plug-And-Play installation. We do NOT have a wire harness for a 6-Pin turn signal switch for a NON-HP Onward.
(Product photo is an AI generated image and may not depict the exact appearance of the wire harnesses received. The individual photos in this listing are actual real photographs of the harnesses you will receive. Please use those photos when looking at the details in the harnesses)





