top of page

We no longer offer upgrade kits for the PowerDrive Plus (Regen 2) system. Use this kit to convert your vehicle to the IQ system. This will you allow you to install a modern upgrade.


48V Regen 2 to IQ Conversion kit.


This kit is needed to convert any 1997 - 2001 Club Car DS with the Regen 2 (Powerdrive Plus) System to the IQ drive system. 


Why should you convert to IQ? Because your vehicle MUST have the IQ drive system in order to use the Alltrax XCT, Navitas TSX, or Navitas AC Drive System. The IQ car is the modern drive system that aftermarket controllers are designed to operate on. Without converting to IQ, none of the wire harness connectors would match and you'd never be able to use those upgrade components.


The Regen 2 system has several components that are the same or compatible with the IQ system. 


The Onboard computer has a 6-pin connector that will plug into the IQ wire harness and work flawlessly with no modifications. This allows you to keep the original factory charger and charging system intact after your conversion. We also give you the option to "bypass" the OBC circuit from the harness. This is what you would select if you are using a smart charger such as a Lester Summit 2, MODZ Max, or FSIP Charge Plus to charge your batteries. This is also what you would select if you're using a lithium battery pack with it's own special charger. 


The F&R Switch, Tow/Run Switch, and Tow/Run Switch bracket are the same on Regen 2 and IQ cars, therefore these are not included in this kit.


Early Regen 2 cars were built with the multi-step potentiometer for throttle control. If your vehicle was built before the serial number AA0112-001470 (2001 year, 12th week), it indicates that your vehicle was built with the multi-step potentiometer. If your vehicle was built after this serial number it indicates that you have the MCOR throttle.  We have a drop down menu on the page that gives you the option of leaving your existing throttle on the car or converting to MCOR throttle with our MCOR4 conversion kit.  We recommend selecting YES to this menu item for several reasons. Reason 1 is that the MCOR4 throttle is MUCH smoother operating than the multi-step potentiometer. Reason 2 is that the wire harness that comes with this kit is designed to plug directly into the MCOR throttle. The multi-step potentiometer may be integrated into this wire harness by matching the five MCOR wires color-by-color to the wires exiting your multi-step potentiometer and the vehicle will run just fine, but much more jerky and abrupt than it would if you were to convert to MCOR4 throttle.  Even if your vehicle has the original MCOR1 throttle, we still recommend selecting YES to this menu option simply due to the age of your MCOR1.  Even though it's compatible, they have not been in production in nearly 15 years now so any original MCOR1 is extremely old at this point, so we recommend swapping it out for the MCOR4. 


Included In the Kit:

1 - Wire Harness, OEM, Club Car DS IQ


1 - MCOR4 Conversion Kit - Optional


1 - Accelerator Pivot Rod - Optional

2 - Accelerator Bearing & Bracket Assembly - Optional

1 - Controller Mounting Panel with mounting hardware - Option


The mounting panel that's included with the kit may or may not be necessary. If you have a 1997 model cart, you'll need the panel.  If you have a 1998 or newer 48 volt cart. The panel will already be installed on the car from the factory and you may exclude it from this kit.






Factory Style IQ Conversion Kit (For 1997-2001 Club Car DS REGEN 2 Cars)


    Please note that item availability has been getting better every day since the COVID-19 Pandemic of 2020. Our online products are typically in stock and available if they are marked "IN STOCK" in our online store. The only reason an item would be marked "OUT OF STOCK" is if we know for a fact that there is a long-term back-order situation on that particular item and we do not know when we will be receiving it. Please be aware that we sell these items online as well as locally, so it's difficult to maintain accurate available quantity on the online store at all times but we try our best to keep up. Typically if we do not have an item in stock, it can be received locally from our vendors in 1-2 days before it ships to you. Certain items may also be shipped directly from the vendors to you without delaying your order arrival at all. If you're concerned about the stock status of an item we strongly suggest that you contact us prior to ordering to ensure that the items are available for immediate shipment. If you place an order for an item that is not in stock you will be notified via email within 24 hours and an estimated ship date (shown on your emailed invoice) will be provided to you at that time.  Please make sure the email address associated with your payment matches the email address that you currently use. Lots of our customers have old email addresses attached to their payment accounts and do not receive emails from us because they forget to check their old email account. If you place an order and choose to cancel at anytime, no problem. Be aware that cancelled orders in back-order status will be fully refunded minus the non-refundable 3.5% PayPal or Credit Card processing fee. This is why we strongly recommend that you ask about availability status PRIOR to ordering by texting or emailing us. Please provide the SKU number of the item in your message. A text message is fine and will typically be answered in just a few minutes. This is explained in further detail on our main page, or by clicking HERE.


    Text: 706-431-3917


    bottom of page